After you have completed the Sky Hub Setup the tracker should be running. Ensure your camera is connected to your network as well as the GPS and SSD to your Jetson device.
Open the main user interface from your browser by entering the IP address of your tracker e.g. http://192.168.1.109. You may want to bookmark this page in your browser!
The first time you open the UI you will be presented with a tracker registration and configuration wizard. This will guide you through the process of setting up your Sky Hub account and adding your camera to the system. This is the process you will follow:
Click 'next' on the Welcome page to continue.
Next you will begin the process of setting up your tracker:
The next page of the wizard allows you to register one or more cameras to your tracker. You will need to provide the following details:
If you are adding more than one camera, click 'Add Camera' then go through the same process. If not click 'Next' then click 'Done'. You will be taken to the login page for your tracker
From this point, you will be able to login to the Sky Hub web interface each time you open the UI in your browser.
Once you have logged on, you will be presented with the main Dashboard page. You can use the buttons on the left of the UI to navigate to:
On the main Dashboard page you will be given system status information, a summary of the most recent events with access to some of the latest videos recorded by your tracker.
This page provides a breakdown of all the events logged by your tracker i.e. date/time, duration. You can see more details and the video for the event by clicking 'View Details'.
The video library contains the videos of all events captured by the tracker.
On the settings page you can rename your node. There are various ultility functions for e.g. resetting or restarting the tracker (currently in development). You can add additional cameras to your system from here as well.